Rubber joint variety usually differs between all kinds of products of pipeline system of the specific circumstances decide to use which kinds of products, such as: conventional pipe connection is to damping noise reduction and compensation displacement with single sphere, if heavy clearance between pipe and displacement is larger, you will need to use double sphere or triple sphere rubber joint to satisfy the pipeline run time displacement compensation when it is necessary to add prevent pulled off limit device, no matter what kind of products are more than the flange connection.Today we to get to know the other kind is clamp rubber joint of new products, to discard the old connection between the two pipe flange connection and if clearance is not standard, so long as but short or long dry products can install and use, method is to directly product two end socket in the pipe after the connection end of the two corresponding direct use of stainless steel band will be fixed in the pipe.Loosen the clamp when removed.Compensation pipeline due to the heat bilges cold shrink, so as to achieve the purpose of the water produced by the displacement.

It compared with the general rubber joint, has the following characteristics:

1, saving the flange and bolt clamp rubber joint, save the expenditure of the project.

2, clamp rubber joint pipe mouth does not need flanging, simplify the work efficiency.

3, the clamp rubber joint simplifies the installation and maintenance work, improve the working efficiency.

4, band made of stainless steel has the characteristic such as corrosion sizes from (- 600 - mm, installation length reference JGD (KXT) - on the basis of Df execution or meet the customer needs to design 5, pressure from 0.25 Mpa to 1.0 Mpa.